当社は2005年より英国RACEFIT社との日本正規代理店にて運営しております。
実店舗での販売は行っておりません。
商品は全てクローズドコース用です。一般公道での使用は行わないで下さい。
商品は全てバックオーダーにて、納期には 30日 程度いただいておりますが、納期に時間がかかる場合もございます。
商品は輸入品ですので天災や輸送機器の都合により、納期に時間が掛かる場合がありますのでご了承ください。輸入商品となりますので、対応できかねる部分もございますのでご了承下さい。
仕様変更、為替変動などにより、価格を予告なく改定する場合があります。
商品取り付けは行っておりません。
商品注文中のキャンセルはいたしかねます。
返品は商品到着後１週間以内に、弊社連絡後、了承済みの商品に限らせていただきます。
お客様責任による商品相違・破損・装着済みの商品等はお受けできませんのでご了承下さい。
製品保証は特に設けておりませんが、正常に使用していただいた製品に不具合が発生した場合は弊社にて修理を承ります。※消耗品等の利用劣化は除きます。
（修理内容により、本国返送による修理となる場合がございます。その際、時間等が掛かることを予めご了承ください。）
※改造商品は、保証対象外となりますのでご注意ください。
Dream Parts: The essence of “factory team engineering”
We are a company of engineering excellence with the vision to design, build, market and sell a brand of unique and innovative motorcycle after-market products. Using exotic materials that both enhancing performance and aesthetics. Where else could someone possibly get such a focused product, unless it was being built specifically as a one-off at a massive cost for a race team? Racefit production products offer focused bolt-off, bolt-on for your bike – no need for an engineering degree to fit it or a development team with works mechanics behind you. To this end Racefit products are high-end focused.
PRODUCTS
Growler
Racefit Growler exhausts are designed and constructed for quality, performance and a style born out of our passion and lifetime’s obsession with motorcycles, engineering and the ultimate exhaust construction material – titanium.
It’s minimalist aesthetic, the very of essence of Moto GP, the Growler is a focused, straight bolt-off, bolt-on for your bike. Every last detail of the construction process is the product of detailed laborious, hand-made craftsmanship, using:
• CP titanium construction including all internal parts • Autoclaved carbon • Brushed (works) finish unpolished welds
Mega
Racefit Mega exhausts are designed and constructed for quality, performance and a style born out of our passion and lifetime’s obsession with motorcycles, engineering and the ultimate exhaust construction material – titanium.
It’s minimalist aesthetic, again the very of essence of Moto GP the Mega is a focused, straight bolt-off, bolt-on for your bike. Every last detail of the construction process is the product of detailed laborious, hand-made craftsmanship, using:
• CP titanium construction including all internal parts • Brushed (works) finish unpolished welds
Legend
All titanium construction full systems for 1980’s superbikes inc. GS1000, GSX1100, Katana, Z1, GPZ, The Legend series will also go on to form the basis for our range of full systems for current un-faired bikes such as ZRX1200, CB1300, Z1000 etc. It weighs a full 3kg inc. everything
Slash
All titanium construction – the simplest detail exhaust tip with no baffling or restriction supplied with ear plugs! Arguably, our most focused product.
Noise Reduction Insert
All titanium baffles to quieten Growlers and Megas, which can be quickly and easily installed.
Brackets
Foot peg elimination bracket in carbon fibre (80g) or anodized ‘tech black’ aluminium (150g).
Competition Rearset
– Factory spec/performance/adjustable/rebuildable – Supplied with Brembo integral reservoir master cylinders – Carbon fibre heel plates – Anodised tech black with red details. Other colours available by special production basis.
Clothing
Racefit branded T-shirts and hooded sweatshirts for those who want an add on, something for the girlfriend or just a bit of Racefit!
Spares
These include decals/stickers, springs, Growler sleeve replacements, re-charge kits, birthdays and spring pullers – all designed to make your Racefit last longer.
WHO IS RACEFIT?
Parallel Lives
Racefit partners Jon and Phil started the company in 2004 both having lived parallel lives with regard to their early interest in motorcycles and without pressure or persuasion continued with this into adolescence and then related jobs expanded their horizons into engineering and a passion for the exotic side of engineering, materials and race details. Phil and Jon had been on the other side of the counter for a long time so knew what it was like to get good/bad service, products that fit/those that came with fitting issues, good/poor quality, so they knew they had to set the bar at the highest level. Simply, their motto is ‘either it’s right or it’s wrong’. Again from their previous experience realizing the measure of a company is then the level of service received when problems occur and how the company then deals with it. Their main goal is that products have to be exciting and for the public to be able to buy something truly unique.
Racefit: Passionate, obsessive, imaginative, enthusiastic, successful & British
Racefit: Tube-bending perfection, products perfectly hand fabricated using the ultimate exhaust construction material – titanium
Racefit: Racing parts for your superbike
Racefit: Not for everybody……..
CAN I FIT THE RACEFIT EXHAUST MYSELF?
Racefit exhausts are relatively simple to install. However, please read the Fitting Instructions and safety notes carefully before attempting to fit the exhaust to your bike. If you do not have the correct tools or have any doubts about your mechanical ability Contact Us for advice or have it fitted by a recognised bike dealer or a competent technician. Please use the Contact Us section should your require further copies.
CAN A RACEFIT PRODUCT JUST KEEP GOING?
Yes. For when your exhaust is looking a little tired and the packing is past it’s best – send your exhaust back to us and we will strip it, rumble it, put new packing and rivet it all back together – in other words, give it a ‘birthday’! Please see this item on the webstore.
WHAT IS ETCHING?
Etching is an electro-checmical that permanently marks the titanium sleeve – see photo below. This is available on request (no extra cost). When checking out either select the option for etching or write “Etched” in the notes section. All orders will be shipped with stickers/decals unless requested. Please note: this is ONLY available on titanium sleeves, NOT carbon.
CAN I FIT A BAFFLE WITH A BLACK EDITION?
Simply no – there is no place to attach the baffle with a Black Edition exhaust. However, if you want a baffle you can simple request a Growler end cap – please see photos below. There is no extra cost. When checking out either select the option for your choice of end cap or write your request in the notes section.
WILL I NEED TO ADJUST THE FUELING (DYNO SET UP) AND WHAT SORT OF BHP GAINS CAN I EXPECT?
Be aware that your motorcycle is a production item and is subject to manufacturing tolerances – therefore no two motorcycles are identical. The performance of your motorcycle is in effect a compromise to comply with various noise and emission laws in various countries. However, making changes to your motorcycle exhaust will not suddenly cause it to not run, lose power or be damaged – your bike will run correctly. Generally there are power gains due to our exhausts being less restrictive. There may be more power gains if the fitting is combined other aftermarket fuelling products.
HOW LOUD ARE RACEFIT EXHAUSTS / WILL MY EXHAUST BE ALLOWED ON TRACK DAYS?
Racefit exhausts (depending on which design on which bike) combined with our Noise Reduction Insert (NRI) are designed to comply with current FIM/ACU (superbike) regulations. Generally track days are run according to these regulations and if your exhaust is correctly maintained you should have no problems.
WHAT WEIGHT SAVING CAN I EXPECT?
World Class weight savings…! Generally Racefit Exhausts weigh between at 350g – 1100g OE exhausts can weigh between 3 – 10 kilos!
HOW DO I CLEAN MY RACEFIT EXHAUST?
Clean the exhaust with a multi-purpose spray lubricant (WD-40 or equivalent) with a soft cloth. Do not use aggressive chemical cleaners. A change in the colour of the exhaust system is normal due to the high temperatures.
CAN I BUY SPARE PARTS?
Yes! See Spares in the Accessories menu on the webstore!
WHAT IF MY STICKER/DECAL COMES OFF?
Replacement stickers are available from Racefit (either over phone or webstore). Wipe down with Isopropyl Alcohol (IPA)/panel wipe before replacing with the new sticker.
HOW OFTEN DOES MY EXHAUST NEED REPACKING – CAN I DO IT MYSELF?
The nature of the product means that at intervals the exhausts will need to be repacked with sound absorption material. Racefit only use Acoustafil branded premium packing. Service intervals will depend on how hard, how far and how often you ride your bike. Regularly check the exhaust visually and listen for any changes in exhaust note. A service / recharging kit is available separately or your exhaust can be returned to Racefit and we will do it for you at a reasonable fee.
Damage caused due to not repacking when needed may not be covered by warranty.
I HAVE HAD AN ACCIDENT WITH MINOR DAMAGE – CAN RACEFIT REPAIR MY EXHAUST?
This depends on the extent of the damage but we will try our best ot repair it. Once the exhaust is returned to us we will assess and provide you a quotation of works.
WHAT IF I WANT SOMETHING A LITTLE BIT DIFFERENT; COULD I SPEND AN EXTORTIONATE AMOUNT OF MONEY ON A FANTASTIC PROJECT THAT YOU GUYS WOULD FIND INTERESTING??
WHAT ABOUT MY BACK PRESSURE AND WHAT DOES IT MEAN?
Talk about exhausts and very often the terms ‘back pressure’ or the ‘right back pressure’ come up. Back pressure is only caused by restriction and has little or nothing to do with performance exhaust design. Although modern OE superbike exhaust systems are very well designed and can reduce noise levels to conform to emissions laws without offering much actual back pressure these systems are to some degree restrictive. Performance exhausts work by “pulse tuning” which is the use of the correct pipe lengths and diameters and correct collector configurations to tune the exhaust pulses to help to fill and scavenge the cylinders. This will increase the volumetric efficiency, which will increase power and torque. Therefore only restrictive exhausts would suffer back pressure. Racefit exhausts do not offer any restriction.
VALVES? WILL LOSING THE VALVE LOSE ME POWER?
(Also known as Set Valves, Exup Valves Etc…) To fit Racefit exhausts on some models it is necessary to disconnect the exhaust valve. The primary function of this valve is noise control and not to boost power (if it was a power valve it would be on every race bike – it doesn’t appear on any!). Therefore disconnection of this valve will not result in a power loss or affect in any way the running of your motorcycle.
WHAT IF I NEED TO RETURN ANYTHING?
You may cancel your order within 7 working days after receipt of goods and your money will be refunded fully within 30 days of return of goods. Sorry, we cannot refund the delivery costs. Parts must be returned in their original, saleable condition (i.e. not run or used) in original packaging.
NB: we cannot refund money paid or deposits on any items that have been specially ordered for you (non-stock items) or manufactured to your specifications.
Naturally, all faulty/incorrect goods can be either exchanged or refunded at the customer’s request providing the goods are returned and are in their original new condition.
International Returns please note:
If you are returning anything to us from outside the EU you must complete a customs declaration correctly indicating that the package contains “returned goods”, “INWARD PROCESSING RELIEF” or similar. If your parcel is stopped in UK customs and a charge levied, we will refuse payment and the package will be returned to you. Under no circumstances will we pay customs duty in order to receive back our products.
Return postage
If you are returning a non-faulty item, then the cost of returning the item to us is your responsibility. Please note the item is your responsibility until it reaches us; for your own protection, we recommend that you send the parcel using a delivery service that insures you for the value of the goods. We cannot refund returned items lost in the post.
THE SMALL PRINT
Exclusion of Certain Liability
The manufacturer, importer or dealer shall not be liable for any incidental damage including personal injury or any other damages caused by improper installation or operation of the Racefit exhaust system. When installing the Racefit exhaust system be careful that the exhaust system does not touch other parts sensitive to high temperature.
Racefit makes no representation or warranties with regard to damage caused by the improper installation, use of non-approved accessories, use and maintenance of the Racefit exhaust system. The warranty is limited to defects recognised by our technical department and to normal use, and excludes items subject to normal wear (gaskets and packing). The guarantee is void in case of accident, modification, improper or competition use.
Do not attempt to install the Racefit exhaust system on a motorcycle for which it was not made.
When the exhaust system gets very hot during operation, be careful not to burn yourself on the exhaust system or parts which are in direct contact with it, even when the motor is not running. Also protect other people, especially children, from the injuries mentioned above.
Technical specification of the Racefit exhaust systems and related products subject to change without notice.